Watching your HP keyboard lose functionality because of a water spill can be distressing. Especially if it happens in the middle of urgent work or a thriller movie. Luckily, following these easy but genius steps can save your HP keyboard. Here’s what you need to do. First, power your laptop off and flip it over.

Then, use a lint-free cloth to wipe excess water from your laptop’s keyboard. If you are hands-on with technical devices, you may also disassemble the keyboard keys, clean them, and place them back. Then, let the laptop sit for 24 to 48 hours to dry properly. After this, give your laptop a test run to see if the keyboard works! If it doesn’t, you might need to consider professional laptop repair. Let’s check out the detailed guide for more clarity.

5 Steps To Fix HP Laptop Keyboard After A Water Spill 

Here’s what you need to do if your keyboard comes in contact with water.

1. Power Your Laptop Off

The first thing on the list is to switch your laptop off and remove it from power sources. Doing this will prevent any electrical short-circuits from happening and damaging your HP laptop’s keyboard. If your laptop battery is not charging or is removable, it is better to take it out. Better be safe than sorry!

2. Wipe Excess Water

Then, take a lint-free cloth or a microfiber towel as they are better at absorption and gentle on the surface, making them less likely to damage our keyboard. Use them to wipe the excess water off the keyboard. Dab gently and let the cloth soak up as much moisture as possible. Do not use paper towels, as they leave residue and small fibers that may reduce your keyboard’s functionality! Work quickly and smartly while wiping the spilled water from your HP laptop keyboard.

3. Flip It Upside Down

Once you have wiped the excess moisture, it is time to deal with the water that may have seeped into the keyboard and your laptop’s internal components. So, turn the laptop upside down. This will allow the excess water to drain out of the keyboard and other components. You may also place a dry, lint-free cloth under the laptop so it can soak up the moisture. Gently shaking the laptop may shove the water back out and prevent it from seeping further.

4. Disassemble and Dry

The next step to fix an HP keyboard if you have spilled water is to disassemble and dry it. A liquid spill may make your keyboard keys sticky and stop them from working. So, cleaning them will help get rid of this issue. All you need is a keycap puller, and then you can remove all the keyboard keys and use warm water or alcohol swabs to clean them.

This step is only recommended for tech-savvy individuals who have the right tools. Otherwise, it is very easy to mess it up. You may also take a photo of the keyboard before disassembling the keys so you know what order to place them back into. Once cleaned, put the keys back again and let the laptop dry for 24 to 48 hours. 

5. See If The Keyboard Works

The final step is to test the water-spilled HP keyboard to see if it works. Test all the keys one after the other to see if they work normally. If you find any key that still does not work, it may be due to a software issue. So, check for updates or reinstall keyboard drivers. 

While these steps summarize how to fix an unresponsive HP keyboard, it is also important to understand that they do not replace the need for professional help. So, bring your water-affected HP laptops to GadgetFix, and we will get them back to working in no time!

What to do if you spill water on your laptop and the keyboard stops working?

First, you need to turn off your laptop to prevent any electrical damage. Then, remove the battery and let your laptop dry out. You may even take it to a professional.

How do I fix my keyboard when it doesn’t work because of water?

Try unscrewing your laptop and letting it dry. You can also skip over this step and take it first thing to an HP laptop repair technician so they can fix it quickly.

How long does it take for a keyboard to dry out?

Let your laptop dry for atleast 24 to 48 hours. Do not put it in rice, as it may damage your laptop further!

Conclusion

In conclusion, taking quick and efficient steps is important if you spill water on your HP laptop keyboard and it stops working. Start by powering off the laptop and removing it from charging. Then, use a lint-free cloth to wipe the excess water and flip the laptop upside down.

You may remove the keys, individually clean them with alcohol swabs, and put them back. Let your keyboard dry for atleast 24 hours, and then see if it works! If you need help throughout the process, you can bring your HP laptop to us at GadgetFix!